BenQ DC 5530 User’s Manual
English
Using the DC E53+
5
3 USING THE DC E53+
3.1 Capture Mode
1. Press the POWER button to turn on the camera.
2. Slide the mode switch to [ ].
3. Compose your image in the LCD monitor.
4. Press the shutter button down halfway (1), then press it
down fully (2).
• Pressing the shutter button down halfway automati-
cally focuses and adjusts the exposure.
• The focus area frame turns blue when the camera is
focused and the exposure is determined.
• When the focus or exposure is not suitable, the frame
of the focus area turns yellow.
• If the photographic preview is set to "ON", the captured image will be displayed while
the image is being recorded onto the memory.
Notes
• The LCD monitor darkens in strong sunlight or bright light. This is not
a malfunction.
• To prevent your images from being blurred while pressing the shutter
button, always hold the camera steady. This is especially important when
you are shooting under low lighting conditions, under which your cam-
era may reduce the shutter speed to ensure your images are properly
exposed.
• Pressing the button changes the LCD display in the sequence of:
Standard Display
→ Simplified Display → No Information.
• To review the last captured image, press the OK button. Press the OK
button again to return to the camera mode.
1
Press down halfway
2
Press down fully
To Next Page
Loading...
Need help?
General
