BenQ DC 5530 User’s Manual
English
Using the DC E53+
20
3.5.2 Setup Menus in Playback Mode
1. Slide the mode switch to [ ].
2. Press the button.
3. Press the W/X buttons to select the [SETUP] menu.
4. Use the S/T/W/X buttons to select the desired setting,
then press the OK button.
Icon Item Functional Description
SPEAKER Enables or disables the sounds associated with camera button functions.
–ON/OFF
FORMAT Erases all data and reformats the internal memory or the SD card loaded in
your camera. Protected images are also erased. SD card cannot be format-
ted if it is write-protected.
– YES/NO
SLEEP If the camera goes unused for a certain period of time while the camera is
powered on, it will switch to idle mode. If the camera is idle, re-activate it
by pressing any button.
– OFF / 30SEC / 1MIN. / 2MIN
RESET Returns all basic settings to the digital still camera’s default settings. The
time setting will not be reset.
– YES/NO
POWER OFF If no operation is performed for a specific period of time, the camera will
automatically turn off. This feature is useful to reduce battery consump-
tion.
– OFF / 3MIN. / 5MIN. / 10MIN.
DATE
PRINTING
The date of recording can be printed directly on still images. This function
must be activated before the image is captured.
–ON/OFF
Icon Item Functional Description
DATE TYPE Sets the displayed type of date and time on the screen.
– [Y/M/D]: Year/Month/Day
– [D/M/Y]: Day/Month/Year
– [M/D/Y]: Month/Day/Year
DATE SETUP Sets the date and the time.
LANGUAGE Sets the language that is displayed on the LCD monitor.
VIDEO OUT Sets the video output standard of the camera so you may connect your
camera to video equipment.
– PAL / NTSC
VERSION Displays the firmware version of the camera.
FORMAT
AUTO
D
AUTO
DATE
SELECT ITEM:
PLAY
SETUP
SELECT PAGE:
NTSC
PAL
EXIT:
Y/M/D
Y/M/D
NTSC
PAL
To Next Page
Loading...
Need help?
General
