EasyManuals Logo

BenQ DC E53+ User Manual

BenQ DC E53+
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
BenQ DC 5530 Users Manual
English
Preparing Your DC E53+ for Use
3
2 PREPARING YOUR DC E53+ FOR USE
2.1 Installing the Battery
We highly recommend you use only the specified rechargeable
lithium-ion battery for your digital still camera. Make sure that
the power of the camera is off before inserting or removing the
battery.
1. Open the battery/SD memory card cover (A).
2. Insert the battery in the correct orientation shown (B).
Move the battery lock lever in the direction of the arrow.
Place the battery so that its label is facing the rear side of the
camera, and then insert the battery.
3. Close the battery/SD memory card cover (C).
To remove the battery:
Open the battery/SD memory card cover and then release the
battery lock lever. When the battery has come out a little, slowly
pull it out the rest of the way.
2.2 Charging the Battery
The battery charge status affects the performance of the DC E53+. To
maximize the performance and life of the battery, it is recommended
that you fully charge the battery using the optional AC power adapter
and then fully discharge it (through normal use) at least one time.
Make sure that the power of the camera is off before inserting the
battery.
1. Insert the conversion adapter into the conversion adapter
terminal of the camera as shown in the illustration.
2. Connect one end of the AC power adapter to the DC IN terminal
of the conversion adapter.
3. Connect the other end of the AC power adapter to a wall outlet.
Charging times differ depending on the ambient temperature and the status of the
battery.
Notes
The DC E53+ must be used with the specified AC power adapter. Damage caused
by the use of an incorrect adapter is not covered under the warranty.
Always make sure that the camera is off before removing the battery.
The battery may feel warm after it has been charged or immediately after being
used. This is normal and not a malfunction.
When using the camera in cold environments, keep the camera and its battery
warm by holding it inside your jacket or other warm protective environment.
A
B
C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BenQ DC E53+ and is the answer not in the manual?

BenQ DC E53+ Specifications

General IconGeneral
BrandBenQ
ModelDC E53+
CategoryDigital Camera
LanguageEnglish

Related product manuals