BenQ DC E53+ - Page 30

BenQ DC 5530 User’s Manual
English
Troubleshooting
26
The camera does not
shoot even when
pressing the shutter
button.
The battery is running low. Recharge or use the AC power
adapter.
The camera is not in shooting
mode.
Slide the mode switch to shooting
mode.
The shutter button was not pressed
all the way down.
Press the shutter button all the way
down.
The internal memory or memory
card does not have any free space.
Load a new card or delete unwanted
files.
The flash is recharging. Wait until the flash mode icon, indi-
cated on the screen, stops flashing.
The camera doesn’t recognize the
memory card.
Format the memory card in this
camera before its first use or before
using it with another camera.
Cannot format a
memory card.
The memory card is write-pro-
tected.
Remove the write protection.
End of the memory card life. Insert a new memory card.
Cannot download
images.
There is insufficient free space on
your computer’s hard disk.
Ensure that the hard disk has space
for running Windows and that the
drive for loading image files has free
space equal to or greater than the
memory card in the camera.
There is no power being supplied to
the camera.
Turn the power on. Use the AC
adapter or recharge the battery if
need be.
Symptom Cause Measure