Operation 25
Using the menus
The projector is equipped with On-Screen Display (OSD) menus for making various
adjustments and settings.
Below is the overview of the OSD menu.
The following example describes how to set the OSD language.
1. Press Menu/Exit on the remote
control to turn the OSD menu on.
3. Press to highlight
Background Color and
press / to select a
Background Color.
2. Use / to highlight the
SYSTEM SETUP: Basic menu.
4. Press Menu/Exit twice* on
the remote control to leave
and save the settings.
*The first press leads you
back to the main menu
and the second press
closes the OSD menu.
Current input
signal
Main menu icon
Main menu
Sub-menu
Highlight
Press
Menu/Exit
to the
previous
page or to
exit.
Status
To Next Page
Loading...
