Operation 53
FUNCTION DESCRIPTION
High Altitude
Mode
A mode for operation in high altitude areas. See "Operating in a
high altitude environment" on page 39 for details.
Lamp Settings
Lamp Mode
See "Setting Lamp Mode" on page 57 for details.
Lamp Spa Mode
Keeps the lamp voltage at a lower level over the first few hundred
hours of lifetime and keep the maintenance at a high level over a
longer period of time. Selecting On activates Lamp Spa Mode
after turning off the projector.
Reset lamp timer
See "Resetting the lamp timer" on page 62 for details.
Equivalent lamp hour
See "Getting to know the lamp hour" on page 57 for details on
how the total lamp hour is calculated.
Security
Settings
Change Password
You will be asked to enter the current password before changing
to a new one.
Change Security
Power On Lock
See "Utilizing the password function" on page 26 for details.
Baud Rate
Selects a baud rate that is identical with your computer’s so that
you can connect the projector using a suitable RS-232 cable and
update or download the projector’s firmware. This function is
intended for qualified service personnel.
Te s t P a t t e r n
Selecting On enables the function and the projector displays the
grid test pattern. It helps you adjust the image size and focus and
check that the projected image is free from distortion. See "Use
build-in test pattern" on page 23 for details.
5. SYSTEM SETUP: Advanced menu
To Next Page
Loading...
