56
After you have successfully paired your mobile device with the projector, pairing information will be stored on both devices and a connection will
automatically be made when Bluetooth is enabled on both devices and both devices are within range of each other.
Ending the Bluetooth connection
In cases where you want to disconnect the mobile device from the projector, either:
• Disconnect from the projector in the Bluetooth menu of your mobile device.
• Press the Bluetooth button on the projector to return the projector to projector mode.
• Press and hold the power button on the projector or remote control to power off the projector.
Pairing/Connecting to a Bluetooth speaker or headphones
The Bluetooth function for your projector is built in the Android system, whose hardware is independent of other input sources like HDMI. Thus, the
Bluetooth function will only be available when using the projector’s built-in Android as an input source. In other words, due to current hardware
limitations, the projector won’t be able to transmit audio using HDMI to external Bluetooth speakers. If you have any further questions, please contact
your local customer care team for more assistance.
1. Make sure the ATV dongle is installed properly (see Installing the ATV dongle on page 32).
2. Power on the projector (see Starting up the projector on page 35).
3. Press the settings button on the remote control
4. Select Remotes & Accessories.
5. Select Add accessory.
6. Activate Bluetooth-pairing mode on the speaker or headphones.
7. Select the speaker or headphones from the device list shown on screen.
8. Select Pair.
If you are unable to activate Bluetooth mode or if the Bluetooth LED does not illuminate, shut off the projector and check to see if the ATV dongle is properly installed. See
Installing the ATV dongle on page 32 for details.
To Next Page
Loading...
