64
Power Mode
The following table describes the items available in the Power Mode menu:
System
The following table describes the items available in the System menu:
Item Options and descriptions
Normal 100% LED brightness. This mode is available only when the power is supplied from the power adapter.
Eco
This setting reduces power consumption by 10%. If Eco is selected, the light output will be reduced and result in darker
projected pictures.
Low power
consumption
Lowers brightness to around 50% to extend the LED life, and reduces noise by around 10%.
Item Options and descriptions
Language
Sets the language for the projector.
Changing the language setting in this menu will not change the language used in Android TV. To change Android TV’s language use the settings
menu on the home screen.
Use remote
control to
power on
Sets to power on the projector via the power button on the remote control.
Once enabled, the projector scans for remote control signals when it is powered off and may drain battery power quickly.
System Update Allows you to update the software on the projector via a USB flash drive.
System
Information
Displays hardware/software information for the projector including its device name and serial number.
Projector
Information
Displays information on the current status of the projector including the current Detected Resolution, Source, Picture
Mode, Power Mode, Color System, Light Usage Time, Firmware Version, and Service Code.
To Next Page
Loading...
