BenQ LU9235 - Page 60

English
60
Main menu Sub-menu Options
System Setup:
Advanced
Test Pattern Off/ Grid/ White/ Red/ Green/
Blue/ Black/ RGB Ramps/
Color Bar/ Step Bars/
CheckBoard/ Horizental Lines/
Vertical Lines/ Diagonal Lines/
Horizontal Ramp/
Vertical Ramps
Projector ID Setting Off/ 01~99
Closed Caption Closed Caption Enable On/ Off
Caption Version CC1/ CC2/ CC3/ CC4
12V Trigger On/ Off
Standby Settings Network Enable Network Standby Mode
Auto Disable Network Standby
Mode
Monitor Out On/ Off
Audio Pass Through Audio In/ Audio L/R/ HDMI 1/
HDMI 2/MHL/ Off
Network settings Wired LAN Status
DHCP
IP Address
Subnet Mask
Default Gateway
DNS Server
Apply
AMX Device Discovery On/ Off
Mac Address
Reset All Settings Reset/ Cancel
Information Current System Status • Source
• Picture Mode
• Lightsource Mode
• Resolution
• 3D Format
• Color System
• Lightsource Usage Time
• Projector ID
• Firmware Version