33 Menu operation
Settings
HDMI Format
Selects a suitable color format to optimize display quality.
• Auto: Automatically selects a suitable color space and gray level for the incoming
HDMI signal.
• RGB Limited: Utilizes the Limited range RGB 16-235.
• RGB Full: Utilizes the Full range RGB 0-255.
• YUV Limited: Utilizes the Limited range YUV 16-235.
• YUV Full: Utilizes the Full range YUV 0-255.
Digital Zoom
Magnifies or reduces the projected image size. After the Digital Zoom page
displays, press ZOOM+/ZOOM- to magnify or reduce the image to a desired size.
To navigate the picture, press OK to switch to the panning mode and press the
directional arrows ( , , , ) to navigate the picture. To restore the picture to
its original size, press AUTO.
The picture can only be navigated after it is magnified. You can further magnify the picture while
searching for details.
Reset Display
Returns all of the adjustments you’ve made for the Display menu to the factory
preset values.
Projector
Installation
See Choosing a location on page 11.
Auto Source
Search
Allows the projector to automatically search for a signal.
Auto Sync
• On: Allows the projector to automatically determines the best picture timings for
the displayed image when PC signal (analog RGB) is selected and AUTO is
pressed.
• Off: The projector will not respond when AUTO is pressed.
Light Settings
• Light Mode: See Setting the Light Mode on page 38.
• Reset Light Timer: See Resetting the lamp timer on page 41.
• Light Usage Time: Displays the information of hours the lamp has been used.
To Next Page
Loading...
