BenQ MX863UST - Remote Control Effective Range

11 Introduction
Controlling your smart device with the remote control
When the projector projects the content from your MHL compatible smart device, you can use the
remote control to control your smart device.
To enter the MHL mode, press and hold AUTO for 3 seconds. The following buttons are available for
controlling your smart device: Arrow keys ( , , , ), MENU, EXIT, ENTER, MHL control
buttons.
To leave the MHL mode, press and hold AUTO for 3 seconds.
Remote control effective range
The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR
remote control sensor(s) to function correctly. The distance between the remote control and the
sensor(s) should not exceed 8 meters (~ 26 feet).
Make sure that there are no obstacles between the remote control and the IR sensor(s) on the
projector that might obstruct the infra-red beam.
When the projector is under MHL mode, the keypad on the projector should be with the same definition of the
keys on the remote control.
• Operating the projector from the front
A
p
p
r
o
x
.
+
3
0
º