33 Menu operation
SYSTEM SETUP: ADVANCED menu
High Altitude
Mode
We recommend you use the High Altitude Mode when your environment is
between 1500 m –3000 m above sea level, and ambient temperature is between
0°C–30°C.
Operation under "High Altitude Mode" may cause a higher decibel operating
noise level because of increased fan speed necessary to improve overall system
cooling and performance.
If you use this projector under other extreme conditions excluding the above, it
may display auto shut-down symptoms, which is designed to protect your projector
from over-heating. In cases like this, you should switch to High Altitude mode to
solve these symptoms. However, this is not to state that this projector can operate
under any and all harsh or extreme conditions.
Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and ambient
temperature is between 0°C and 35°C. The projector will be over cooled, if you turn the mode on
under such a condition.
Audio
Settings
• Mute: Temporarily turns off the sound.
• Volume: Adjusts the sound level
• Power On/Off Ring Tone: Turns on or off the ring tone when the projector is
in startup and shutdown process.
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound
mute or changing the sound level will not affect the Power On/Off Ring Tone.
Lamp Settings
• Lamp Mode: See Setting the Lamp Mode on page 37.
• Reset Lamp Timer: See Resetting the lamp timer on page 40.
• Lamp Timer: See Getting to know the lamp hour on page 36.
Security
Settings
See Utilizing the password function on page 23.
Baud Rate
Selects a baud rate that is identical with your computer’s so that you can connect
the projector using a suitable RS-232 cable and update or download the projector’s
firmware. This function is intended for qualified service personnel.
Test Pattern
Adjusts the image size and focus and check that the
projected image is free from distortion.
To Next Page
Loading...
