BenQ MX863UST - SYSTEM SETUP: BASIC Menu

31 Menu operation
SYSTEM SETUP: BASIC menu
Presentation
Timer
Presentation timer can indicate the presentation time on the screen to help you
achieve better time management when giving presentations.
• Timer Period: Sets the time period. If the timer is already on, the timer will
restart whenever the Timer Period is reset.
• Timer Display: Allows you to decide if you want the timer to show up on the
screen for one of the following time periods:
• Timer Position: Sets the timer position.
• Timer Counting Direction: Sets your desired counting direction between:
• Sound Reminder: Allows you to decide if you want to activate sound reminder.
Once enabled, a double beep sound will be heard at the last 30 seconds of
counting down/up, and a triple beep sound will be produced when the timer is up.
• On/Off: To activate the presentation timer, select On.
Language Sets the language for the On-Screen Display (OSD) menus.
Projector
Installation
The projector can be installed on a ceiling or behind a screen, or with one or more
mirrors. See Choosing a location on page 12.
Menu Settings
• Menu Display Time: Sets the length of time the OSD will remain active after
your last key press.
• Menu Position: Sets the On-Screen Display (OSD) menu position.
• Reminder Message: Sets the reminder messages on or off.
Always
Displays the timer on screen throughout the
presentation time.
3 min/2 min/1 min Displays the timer on screen in the last 3/2/1 minute(s).
Never Hides the timer throughout the presentation time.
Count Down Decreases from the preset time to 0.
Count Up Increases from 0 to the preset time.