n
Clear Call Queue (1.3)
If your Installer has programmed your Control panel to
send Alarm calls, it will call the programmed telephone
numbers each time an Alarm occurs. In the event of a
False Alarm, this command will allow you to interrupt
the ongoing call, and clear the call queue.
+
Limited User PIN’s can ONLY delete calls gener
-
ated by Events from their Areas, while Main User
PIN’s can ALSO delete events from the system if
enabled to do so by the Installer.
+
Disarming with a Main User PIN automatically de
-
letes the calls in the queue, if enabled to do so by
the installer.
1. Press A or B to view the Clear call queue option:
USER 1.3
Clear call queue
2. Press ENTER to select the option:
Clear call queue
Are you sure?
3. Press ENTER to confirm:
Clear call queue
Done !!
4. Press ESC to step back to the User menu.
n
Teleservice Request (1.4)
Ï
The Absoluta 630 control panel does not support
this option but end user can still ask for teleservice
to the installer in another ways.
If your Installer has set up this facility, this command will
allow you to request on-line assistance remotely (main
-
tenance that does not require components or wiring).
1. Press A or B to view the Teleser. request option:
USER 1.4
Teleser. request
2. Press ENTER to select the option:
Teleser. request
Are you sure?
3. Press ENTER to confirm.
44 Expandable Hybrid Control Panels
To Next Page