n
Enable/Disable Key (2.9)
This option will allow you to Enable/Disable the Keys.
+
A Key can be Enabled/Disabled ONLY by PINs
which operate the Partitions it is assigned to.
+
Disabled keyfobs will continue to show the status
of the system.
1. Press A or B to view the Dis/Ena.key option:
USER 2.9
Dis/Ena.Key
2. Press ENTER to select the option:
Key
1=WLS 2=BPI
3. Select the Key type to Disable/enable:
Ø
Press 1 for keyfobs
WLS key --
Ø
Press 2 for Proximity (BPI) Keys
Key ---
4. Enter the Identification Number of the Key to Dis-
able/Enable, then press:
Ø OFF to disable the Key
Key 001
Disabled
Ø
ON to Enable the Key
Key 001
Enabled
5. Press ESC to go back to step 4.
View
n
View LOG (3.1)
You can view the event in the logger as follow.
1. Press A or B to view the View LOG option:
USER 3.1
View LOG
2. Press ENTER to select the option:
View LOG
1=Last 2=since..
3. Press 1 to view the events from the last and skip to
step 5 or, press 2 to view the events from a specific
date and time:
Data/Time
mm/dd/yy hh:mm
4. Enter the required Data and Time to start to view
the events, then press ENTER:
Ø
the display top line shows the order number of the event;
Ø
the display bottom line shows the event description.
EV.0125
User entry
5. Press A and B to scroll the events. Press C and D to
scroll the details of the event.
EV.0125 WHO
INSTALLER
The display top line shows the detail name on the right,
as follow.
Ø
WHO: depending on the event, the zone, the key
(card/tag), the keyfob or the super key that had gen
-
erated the event.
Ø
WHERE: depending on the event, the Wireless Re
-
ceiver, the RS232 port, the USB port, the Telephone
Line, the System, the Panel, the Keypad, the Key
reader, the Expander In, the Main Board, the Ex
-
pander Out or the Power Station where the event oc
-
curred.
Ø
PARTIT.: depending on the event, the involved Parti
-
tions.
Ø
WHEN: the date and time when the event has oc
-
curred.
52 Expandable Hybrid Control Panels
To Next Page