Bentel Security Academy 4 - Customer Telephone Options (Address 158); Teleservice (Addresses 159 through 164)

Add. Telephone number 8 Data
154 telephone number (16 digits max.) î
155 call type î
156 protocolsî
157 customer code 4 digits (5 for CESA) u
Customer Telephone Options (Address 158)
Tone check: use key to enable / disable this option.
Key OFF = Tone check enabled
Key ON = Tone check disabled
Dialling Type: use key to select the dialling type.
Key ON = DTMF dialling
Key OFF = Pulse dialling
Test Event: use key to enable / disable this option.
Key ON = Test call (Teleservice) enabled
Key OFF = Test call (Teleservice) disabled
If the Test call (Teleservice) is enabled, the panel will not send a Test
event call to the Central Station (see page 57 in the "Installation Manual").
Add. Description Data
158 Tone check, Dialling type, Test Event u
Teleservice (Addresses 159 through 164)
Number of rings before the control panel answers: max. 2 digits.
Double call: use key to enable / disable this option.
key ON = Double call enabled
key OFF = Double call disabled
Callback: use key to enable / disable this option.
Key ON = Callback enabled
Key OFF = Callback disabled
Teleservice telephone number: press the number key that corresponds to the
Teleservice (Installer) telephone number----accepted keys through .
Test event Interval: enter the number of hours between test events----4 digits maximum.
PROGRAMMING FROM KEYPAD 19