Add. Keys OPTIONS DEFAULT
423 Auto-reset partition no. 1
Auto-reset partition no. 2
Auto-reset partition no. 3
Auto-reset partition no. 4
False Digital Key signalling
Immediate Mains Failure
signalling
Key reader LEDs permanently
active
Telephone line check
u
424 Arm / DisA. partition no. 1 by Ter. [K]
Arm / DisA. partition no. 2 by Ter. [K]
Arm / DisA. partition no. 3 by Ter. [K]
Arm / DisA. partition no. 4 by Ter. [K]
Enable Instant Reset of zone
alarm
Start Test event
Two-way audio alert
u
425 Reset tamper memory denied to
User Code
Reset alarm memory denied to
Installer Code
Arming denied with battery
trouble
Enable Installer Code for User Code
PIN programming via PC
Enable Call all for the Central
station calls
Enable Call all for Voice calls
Bypass Zone Tamper
Enable Auto-bypass
u
Enable Installer Code
PIN for User Code
PIN programming
via PC
When this option is enabled the Installer can program all the User Code PINs via
PC (the Main User PIN will not be required). However, the Installer Code PIN must
be entered in the Installer Code page. The words Freed PIN Programming on
the title bar of the PIN Programming window will flash to signal option enabled.
+
This option can be enabled from the keypad only.
PROGRAMMING FROM KEYPAD 31
To Next Page
Loading...
