Beok Controls TDR89 - Advanced Setting; Temperature calibration; Sensor selection; Limit temperature value modification

7. Advanced Setting
Display Code
Function
Setting And Options
Temperature
calibration
-9.9-9.9℃
-1℃
Sensor selection
IN:Use the internal sensor
OUT:Use the external sensor
ALL: Use both internal and
external sensors.
IN
35-60℃
60℃
04
Temperature
hysteresis
0.5-10℃
1℃
05
Antifreeze function
OFF
06
Weekly
mode setting
OFF:Close anti-frozen
ON:Open anti-frozen
5
7: 7 working days
6: 6 +1 rest dayworking day
5: 5 +2 working day rest day
02
01
03
Factory
Defaults
Limit temperature
value modification
OFF:turn off programming
In the state of power-off, press the key and the key for 5
seconds to enter the advanced option setting.
Press to enter the next option, press “+” or “-” to adjust,and
press to . save and exit
programming