6.Set the Mode.programming
①②③④⑤ display in the position of week means
5(working day)+2(rest day)
If you want to make temporary adjustment in any period,
press , then will display. “+” or “-” It will run according to
your manual settings and resume programming mode at the
next programming time point
Press “+” or “-” to set the time.
Press to enter the temperature adjustment.
Press “+” or “-” to set the temperature;
Press to enter the next period adjustment.
Press to exit and save.
Press to switch between manual mode and programming
mode.
Press and hold into programming mode setting. time and
①②③④⑤ will display.
To Next Page
Loading...
