EasyManua.ls Logo

Bercomac Versatile Plus - User Manual

Bercomac Versatile Plus
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
CAUTION:


BERCO
Versatile Plus 48’’ & 54”
& Premium 54’’ Snowblowers
for
ALL TERRAIN VEHICLES & UTILITY VEHICLES
R-07142020
 
 
*109583*
OWNERS MANUAL
(Original version)
Model Number
109583_EN
700580-4
700580-4-14K
700580-4-15A-KIM
700580-4-20H
700582-4
700582-4-15A-KIM
700582-4-20H
700716-4

Questions and Answers

  • P
    pmendozaAug 11, 2025
    Why does my Bercomac Snow Blower engine shut off when the electric clutch is engaged?
    • L
      Lori WellsAug 11, 2025
      If your Bercomac Snow Blower engine shuts off when engaging the electric clutch, it may be due to sensitive oil sensors reacting to the electromagnetic field from the clutch. Disconnect the oil sensor to resolve this issue.
  • D
    Diane HuffAug 19, 2025
    What to do if the electric clutch slips on my Bercomac Versatile Plus Snow Blower?
    • R
      Rodney CrossSep 12, 2025
      If the electric clutch of your Bercomac Snow Blower is slipping, first try recharging the vehicle's battery, as the issue may stem from insufficient electrical current. If that doesn't resolve it, check for and replace any damaged wiring that may be cutting off the electrical current. Also, the clutch basket might be contaminated, in which case you should clean the plates with brake cleaner.
  • D
    Donald OdomAug 27, 2025
    What to do if the electric chute motor does not work on my Bercomac Versatile Plus Snow Blower?
    • T
      Todd FoxAug 27, 2025
      If the electric chute motor on your Bercomac Snow Blower isn't working, it could be overheating. These motors have an internal protector, so wait 10 minutes before trying again. Alternatively, the motor or chute might be frozen; try slapping the chute or wiggling it from side to side. Another reason could be loose or oxidized connectors on connectors or motor, so retighten or clean the connectors, or replace connector part # 106201. Finally, a defective control box or broken wire harness can also cause this issue, in which case you should replace the control box or wire harness.
  • C
    Christopher JosephSep 2, 2025
    Why is the electric clutch noisy on my Bercomac Snow Blower?
    • N
      Nicholas RamseySep 2, 2025
      If the electric clutch on your Bercomac Snow Blower is noisy or vibrates abnormally, it could be due to loose mounting bolts; try tightening or replacing them. Another possible cause is damaged clutch components, which would need to be repaired or replaced.

Bercomac Versatile Plus Specifications

General IconGeneral
TypeTwo-Stage
Skid ShoesAdjustable
Auger MaterialSteel
Intake Height21 inches
Auger Diameter12 in (30 cm)
Impeller Diameter12 in (30 cm)
Transmission6 Forward / 2 Reverse
EngineBriggs & Stratton

Related product manuals