21
Level paved surface: Adjust skid shoes to allow 3/16”
to 1/4" or 5 mm to 7 mm clearance between
cutting edge and surface.
Uneven or gravel surface: Adjust skid shoes to allow
1/2” to 5/8" or 13 mm to 16 mm clearance
between cutting edge and surface.
It is the snowblower operator’s obligation to make
sure there are no individuals close by or objects that
can be thrown in this zone when the snowblower is
running.
When removing snow, do not use the snowblower as
a dozer blade to push snow. Allow snowblower to
ingest snow at its own speed. If the speed of your
A.T.V. is too fast, the snowblower may become
overloaded and clogged.
To Next Page
Loading...
