Model H79
16
Thread the Needle Using the Needle Threader
1. Lower the presser foot at this time. Lower the needle threader lever
until it stops. Hook the thread into the threader guide and pull the
thread to the right.
2. Push the needle thread lever toward the back to swing threader
into place.
3. Check to be sure that the hook has passed through the eye of the
needle and route the thread through the metal guides and under
the hook. Pull the thread toward you and check that it is being
held by the thread hook.
Operation
H79_Manual.indd 16H79_Manual.indd 16 10/6/2008 4:29:06 PM10/6/2008 4:29:06 PM
To Next Page
Loading...
