Bernette H79 - Page 38

Model H79
38
Clean the areas shown on the diagram with a clean soft brush.
Follow by adding one drop of oil at each location on the diagram.
Replace the plastic cover and the screw. Sew out a design on a scrap
piece of fabric to test the machine and work in the oil. This will also
remove any excess oil.
Cleaning and Oiling
Cleaning and Oiling
H79_Manual.indd 38H79_Manual.indd 38 10/6/2008 4:29:13 PM10/6/2008 4:29:13 PM