Model H79
40
Error Codes and Troubleshooting
Error Codes and Troubleshooting
26
27
28
36
40
53
+X limit reached.
-Y limit reached.
+Y limit reached.
No design selected.
The main motor has stalled.
Not enough available free
space.
Start design in center of
hoop and trace to make sure
design will t and restart
design.
Start design in center of
hoop and trace to make sure
design will t and restart
design.
Start design in center of
hoop and trace to make sure
design will t and restart
design.
Select a design.
Check for obstructions or
thread nests.
Delete some designs in the
internal memory using Navi-
gator.
Error Problem Solution
H79_Manual.indd 40H79_Manual.indd 40 10/6/2008 4:29:13 PM10/6/2008 4:29:13 PM
To Next Page
Loading...
