19
EXPRESS DUAL • ED3000
© Bernhard and Company Limited
6. In-frame Grinding
(Continued)
6.8 When Is The Job Done ?
6.8.1 You will hear the cut begin to run out - a rough guide of cutting times will be:
Fairway Units 12–20 minutes
Medium Triple Units 10–15 minutes
Greens & Hand Mowers 8–10 minutes
6.8.2 Now take off the cut by simultaneously moving both hand wheels anti-clockwise, when the
stone is at one end of its traverse, until the grinding wheel is clear of the reel.
6.8.3 Push the total / “E”- stop button.
NOTE NEVER stop the machine while the grinding wheel and reel are in contact except in an
emergency. Never allow the grinding wheel and reel to spark out. If this does happen put
another cut on for a few more passes.
To Next Page
Loading...
