15
Sew Rolled Hem
Set seam width finger knob to "R" to retract the seam
width finger and set it for rolled hem.
PLEASE NOTE:
Be sure to push seam width finger knob as far as
it will go in the direction of setting "R".
HOW TO REMOVE AND INSERT
NEEDLES
Needle Position
– With this machines, two needles can be inserted
to the needle clamp as shown in the drawing
but.
– The Instruction Book refers to different needle
positions by illustrating the needle clamp at
right.
PLEASE NOTE:
When both the left and right overlock needles are
inserted, the left needle will be slightly higher
than the right.
(A) Left Needle (LN)
(B) Right Needle (RN)