Bernina Bernette Funlock b44 - Stretch Overlock (Differential Feed 1-0.6)

30
Stretch Overlock (1–0.6)
Stretch overlock is ideal for sewing decorative collars,
sleeves, skirt hems, etc. on loosely knit and woven
fabrics.
• To set the dierential feed adjusting dial
for stretch
– Set differential feed adjusting dial below setting
"1".
– To sew a seam, apply gentle tension to the
fabric by holding the seam lightly in front and
back of the presser foot.
PLEASE NOTE:
If amount of “stretch” is not correctly set in rela-
tion to the fabric being sewn, the fabric is apt to
shift away from the needle resulting in improp-
erly sewn overlock seam.
In such case, reset differential feed adjusting
dial closer to the center mark.
Be sure to reset the differential feed adjusting
dial to graduation “1” for normal overlock stitch-
ing.