06 Bertec Corporation Instrumented Treadmill Manual
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or break down, grounding provides
least resistance for electric current to reduce the risk of electric shock. This product is
equipped with a cord having an equipment-grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualied electrician or serviceman if you are in doubt as to
whether the product is properly grounded. Do not modify the plug provided with the product
- if it will not t the outlet, have a proper outlet installed by a qualied electrician.
This product is for use on a circuit having a nominal rating more than 200 V and is factory
equipped with a specic electric cord and plug to permit connection to a proper electric
circuit. Make sure that the product is connected to an outlet having the same conguration
as the plug. No adapter should be used with this product. If the product must be reconnected
for use on a different type of electric circuit, the reconnections should be made by qualied
service personnel.
Safety Information and Labeling
To Next Page
Loading...