Bertec Corporation Instrumented Treadmill Manual 05
IMPORTANT SAFETY INSTRUCTIONS
When using the instrumented treadmill, basic precautions should always be followed,
including the following:
To reduce the risk of personal injury, read and understand all the instructions before using
this treadmill.
DANGER - To reduce the risk of electric shock:
1. Always unplug the treadmill from the electrical outlet immediately after using and before
cleaning.
WARNING - To reduce risk of burns, re, electric shock, or injury to persons:
1. The treadmill should never be left unattended when plugged in. Unplug from outlet
when not in use and before putting on or taking off parts.
2. Close supervision is necessary when the treadmill is used by, on, or near children,
invalids, and disabled persons.
3. Use the treadmill only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer.
4. Never operate the treadmill if it has a damaged cord or plug, if it is not working properly,
or if it has been damaged. Contact Bertec Corporation for service examination and
repair.
5. Never operate the treadmill with the control cabinet air vents blocked. Keep the air
vents free of lint, hair, etc.
6. Never drop or insert any object into any opening.
7. Do not use outdoors.
8. To disconnect, turn all controls to the off position, then remove the plug from the outlet.
9. Connect this treadmill to a properly grounded outlet only. See Grounding Instructions.
SAVE THESE INSTRUCTIONS
Safety Information and Labeling
To Next Page
Loading...