Bertec Corporation Instrumented Treadmill Manual 07
Safety Labels
FIGURE 2: Important labels on the Instrumented Treadmill and Electronic Control Unit
This caution label is located on the handrail. Since the treadmill
has moving belts, it is recommended to hold the handrails while
stepping on or off the belts.
This label is placed on the side of the base of the treadmill. All
body limbs should remain clear of this area to avoid injury.
Do not exceed the maximum load capacity recommended by
this label.
This label species the operating voltage, current, and
frequency of each treadmill.
Located on the Remote E-stop Pendant, this label informs the
user that the pendant is used to stop the belt immediately.
Safety Information and Labeling
To Next Page
Loading...