ENGLISHGold/Plus/Easy refrigerated cabinets
75
Ed. 12/2020
4.4 Cleaning the condenser, refrigerator unit and evaporator
A dirty appliance affects the performance of the motor and increases consumption of electricity.
The periodic cleaning of the parts is, therefore, necessary to guarantee the long life and long-term excellent perfor-
mance of the appliance.
How the appliance is used determines how often it needs to be cleaned. So, it is advisable to clean the components
once a month if the machine works in a laboratory where flour-based foods are produced (bakeries, pizzerias, pastry
shops etc.) and at least once every three months for all other uses.
To clean the condenser, refrigeration unit and evapora-
tor, follow the procedure below:
– turn the switch connecting to the mains to the ”OFF”
position
– with appliances equipped with a plug, remove the
plug from the socket
– access the upper compartment of the machine (1)
– Use a vacuum cleaner and a soft bristled brush to re-
move any dust that has accumulated on the condens-
er, taking care to clean the fins carefully
– if you find dust deposits difficult to reach with the
vacuum cleaner and/or brush, use compressed air to
remove them from the affected parts
– then use a damp sponge to clean in the gaps and,
finally, dry the clean parts completely using a soft dry
cloth.
Fig. 25
a
WARNING DANGER
– While cleaning, never use metal and/or sharp objects that may damage the components.
– While cleaning, we recommend using protective gloves as accidental contact with the condenser fins
may cause cuts and grazes.
To Next Page
Loading...