ENGLISH Gold/Plus/Easy refrigerated cabinets
66
Ed. 12/2020
3 SWITCHING ON AND USE
3.1 Preliminary operations
Before starting the appliance, make sure that:
– the electrical system complies with the specific Regulations and has been made by professionally qualified per-
sonnel;
– the voltage of the appliance, indicated on the Technical Plate, corresponds to the line voltage in the power socket;
– there is a suitable earthing system and a bipolar mains switch with differential;
– the power socket is of a type suitable for receiving the plug of the appliance; do not use extensions or multi-adapt-
ers;
– the power socket is easily accessible after installation;
– the installation premises meets the requirements of the Technical and Health Regulations and the Legislation in
force.
3.2 Correct use
To ensure the maximum efficiency of the appliance, it
is necessary to use it following these few but important
precautions.
– do not overload the racks: the maximum load capaci-
ty for each individual rack is 20 Kg.
– Arrange the products inside the appliance, taking
care not to obstruct the free circulation of refrigerat-
ed air inside it. For this purpose, when products are
arranged on the shelves, it is advisable to leave a gap
of several centimetres between one product and an-
other, so that the surfaces of each single product are
exposed to the flow of refrigerated air, thus encourag-
ing a rapid and uniform cooling.
– Do not overload the shelves of the appliance, espe-
cially the shelves near the refrigeration air inlet and
outlet vents. There is a label on the inside, on the side
of the shelf, which indicates the maximum load ca-
pacity.
MAX 20 Kg
Fig. 20
To Next Page
Loading...