Bestop Trektop NX - Section 11: Mount Header Assembly to Sunrider Bracket; Step 1: Fold Fabric and Place Header; Step 2: Slide Bow over Bracket

Page 20
Mount Header Assembly to Sunrider Bracket
Section 11
Step 1 Step 2
Step 1 Step 2
Fold the Top Fabric toward the front of the
Header. Place the Header Assembly on
vehicle, with the backing up and the Side
Bows on top of the Door Surrounds.
Pull back on the quick release knob on the
Side Bow and slide the Side Bow over the
Sunrider Bracket. Repeat on the other side
of the vehicle.