Name: Beta REV 3
Brand: Beta
Rating: 5 (1 reviews)

To Next Page

To Previous Page

MAINTENANCE AND CHECKS

SPSP

ARK PLARK PL

ARK PL

UGUG

Keeping the spark plug in good condition wiII reduce fuel consumption and

increase engine performance.

To perform the check, simply slide off the electrical connection tube and unscrew

the spark plug.

Examine the distance between the electrodes with a feeler. This distance should be

from 0.5 to 0.6 mm. If it is not, it may be corrected by bending the earth electrode.

Check as weII that there are no cracks in the insulation or corroded electrodes. If

so, replace immediately.

Observe the chart on page 62 when performing the check.Observe the chart on page 62 when performing the check.

Observe the chart on page 62 when performing the check.

When replacing the spark plug, screw it in by hand until it stops, then tighten with

a wrench.

Note:Note:

Note:

•The use of Iow-quality oil will cause an increase in carbon deposits. We therefore

advise the use of BARDHAL VBA oil.

•Always use NGK BR7ES spark plugs.

Questions and Answers:

Need help?

Do you have a question about the Beta REV 3 and is the answer not in the manual?

Beta REV 3 Specifications

General