Beta REV 3 User Manual

60
MAINTENANCE AND CHECKS
GB
3
LIQUID COOLANTLIQUID COOLANT
LIQUID COOLANTLIQUID COOLANT
LIQUID COOLANT
The level check must be performed with
the engine cold, as follows:
•Remove plastic grid D
•Unscrew cap
AA
AA
A and check the level of
the liquid
•lf the level is dose to the bottom of pipe
proceed to add liquid
Circuit capacity is indicated in the table
on pag. 43. Use the liquids
recommended on the table on pag. 47.
WARNING:WARNING:
WARNING:WARNING:
WARNING:
To avoid burns, never unscrew the
radiator filer cap when the engine Is hot.
SILENCERSILENCER
SILENCERSILENCER
SILENCER
If an increase in exhaust noise is noted,
check the silencer.
Proceed as follows:
•Unscrew the two screws
BB
BB
B
•Remove end piece
CC
CC
C
•Extract the preformed part in fiber wool
and substitute with a new one
(disposable as spare-part)
•To reassemble, proceed in the reverse
order.

Beta REV 3 Specifications

General

Manufacturer	Beta
Model	REV 3
Fuel System	Carburetor
Starting System	Kickstart
Transmission	6-speed
Final Drive	Chain
Engine Type	Single-cylinder, two-stroke
Cooling System	Liquid cooled
Ignition	Electronic
Rear Suspension	Sachs shock absorber
Front Brake	Disc
Rear Brake	Disc
Front Suspension	Marzocchi upside-down fork