62
MAINTENANCE AND CHECKS
GB
3
CHECKS AFTER CLEANINGCHECKS AFTER CLEANING
CHECKS AFTER CLEANINGCHECKS AFTER CLEANING
CHECKS AFTER CLEANING
After cleaning the motorcycle, it is good practice to check:
•Clean the air filter (proceed as described on pag.56)
•Remove the flywheel cover to eliminate any water that may have entered.
•If ignition is disassembled and reassembled, check the position of the stator
marked by an indicator on the plate and by a corresponding marker on a halt-
casing fastening support.
•For carburetor tank proceed as described on pag.61, to eliminate any water that
may have entered.
•Grease the chain.
MAINTENANCE SCHEDULEMAINTENANCE SCHEDULE
MAINTENANCE SCHEDULEMAINTENANCE SCHEDULE
MAINTENANCE SCHEDULE
To Next Page
Loading...
