Beta REV 3 User Manual

68
ADJUSTEMENTS
GB
4
ADJUSTMENT OF REAR SHOCKADJUSTMENT OF REAR SHOCK
ADJUSTMENT OF REAR SHOCKADJUSTMENT OF REAR SHOCK
ADJUSTMENT OF REAR SHOCK
ABSORBERABSORBER
ABSORBERABSORBER
ABSORBER
Adjustment of spring IoadAdjustment of spring Ioad
Adjustment of spring IoadAdjustment of spring Ioad
Adjustment of spring Ioad
•For a more active “quicker” suspension
setting, open compression regulation
knob
AA
AA
A
•For a more controlled “slower”
suspension setting, closed compression
regulation
AA
AA
A
•Cleaning periodically the rebound rubber as follow:
lower/remove rebound rubber using a little screwdriver and blow with compressed
air in the spring spacer milling
•Always check the top and bottom bolts are tight.
In the event of any malfunction,In the event of any malfunction,
In the event of any malfunction,In the event of any malfunction,
In the event of any malfunction,
contact our authorised customercontact our authorised customer
contact our authorised customercontact our authorised customer
contact our authorised customer
service network.service network.
service network.service network.
service network.

Beta REV 3 Specifications

General

Manufacturer	Beta
Model	REV 3
Fuel System	Carburetor
Starting System	Kickstart
Transmission	6-speed
Final Drive	Chain
Engine Type	Single-cylinder, two-stroke
Cooling System	Liquid cooled
Ignition	Electronic
Rear Suspension	Sachs shock absorber
Front Brake	Disc
Rear Brake	Disc
Front Suspension	Marzocchi upside-down fork