Beta RR 480 EFI - Vehicle Preparation for Use in Heavy-Duty Conditions

2
OPERATION
29
GB
VEHICLE PREPARATION FOR USE IN HEAVY-DUTY
CONDITIONS
Using the vehicle in heavy-duty conditions, such as sand or wet or muddy soils, may
require the corrective actions mentioned below.
The following are considered heavy-duty operating conditions:
Dry sand
Wet sand
Particularly wet and muddy soils
Driving in high temperature and low speed conditions
Driving in low temperature and snow conditions
General actions:
Verify filter and filter box cleaning (page 45)
Verify tensioning and wear of the chain (page 62)
Verify all electrical connectors, making sure they are well connected. Keep
them dry and clean.
USE ON DRY SAND
Apply specific protection against sand to the air filter
Clean the chain
Assemble a steel crown. For this operation contact the Betamotor service net-
work. (Do not grease the chain!)
Verify that the radiator fins are clean
Verify that the radiator fins are not bent
USE ON WET SAND
Apply an anti-water cap for the water filter
Clean the chain
Assemble a steel crown. For this operation, contact the Betamotor service
network. (Do not grease the chain!)
Verify that the radiator fins are clean
Verify that the radiator fins are not bent