EasyManua.ls Logo

Beta RR 480 EFI - Chain; Check and Adjust Tightening Chain; Tyres

Beta RR 480 EFI
82 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
CHECKS AND MAINTENANCE
61
GB
CHAIN
Checking the drive chain periodically to ensure longer chain life. Always keep it
lubricated and clean of deposited dirt.
Take special care in preventing the lubricant from coming into contact with the rear
tyre or brake disc, otherwise the tyre grip and the action of the brake would be greatly
reduced, making it very difficult to control the vehicle.
CHECK AND ADJUST
TIGHTENING CHAIN
Position the drive on a flat base ensuring
stability.
If the chain play exceeds 30÷35 mm ten-
sion the chain.
30÷35 mm
TYRES
Only fit tyres approved by BETAMOTOR.
Unsuitable tyres can adversely affect the road holding of the vehicle.
•Toprotectyoursafety,immediatelyreplaceanydamagedtyres.
•Slicktyresadverselyaffecttheroadholdingofthevehicle,especiallyonwetroads
and in off-road riding.
•Insufcientpressureresultsinabnormalwearandoverheatingofthetyres.
•Thefrontandreartyresmusthavethesametreaddesign.
•Alwaysmeasuretheinatingpressureswhenthetyresarecold.
•Keepthetyrepressureswithintheprescribedrange.

Table of Contents

Related product manuals