Bewator Bewacom BM3 - Changing the door unlock time; Extending the opening time 10 times

18 Bewacom Technical manual
Changing the door unlock time
When Bewacom is delivered the door unlock
time is set to 7 seconds.
1 Set Bewacom to programming mode.
2 Press A28.
3 Select the required unlock time in
seconds (01-99).
4 Press B to exit programming.
Extending the opening time 10
times
Using this function the door unlock time can
be increased by a factor of ten.
1 Set Bewacom to programming mode.
2 Press A64.
3 Press 1 to extend opening time 10 times.
4 Press B to leave programming mode.
To deactivate the function, press 0 in step 3
instead.