Bewacom Technical manual 19
Changing the calling time
When Bewacom is delivered the calling time is
set to 30 seconds.
1 Set Bewacom to programming mode.
2 Press A29.
3 Select the desired calling time in seconds
(01-99).
4 Press B to exit programming.
Extending the calling time 10 times
Using this function the calling time can be
increased by a factor of ten.
1 Set Bewacom to programming mode.
2 Press A61.
3 Press 1 to extend the calling time 10
times.
4 Press B to leave programming mode.
To deactivate the function, press 0 in step 3
instead.
To Next Page
Loading...
