24 Bewacom Technical manual
”Hotline”
By using the facilities of the telephone system,
this function can be used to call a particular
extension from a single push of the B button
on the Bewacom. When this function is set,
the Bewacom will seize the line immediately
the B button is pressed. No other number is
permitted at this point (the keyboard is
disabled). The telephone system is then
programmed to respond to this ”hotline”
condition.
To enable this function.
1 Set Bewacom to programming mode.
2 Press A67.
3 Press 1 to enable hotline.
4 Press B to leave programming mode.
To deactivate the function, press 0 in step 3
instead.
To Next Page
Loading...
