Bewacom Technical manual 23
Possibility to call the Bewacom
Using this function, the Bewacom can be
called from the switchboard or from an
extension to assist a visitor having trouble
using the door telephone.
To enable the function:
1 Set Bewacom to programming mode.
2 Press A66.
3 Select and programme the desired 4-digit
code. The code is keyed in at the
telephone to open the door.
4 Enter the code one more time.
5 Press B to leave programming mode.
To deactivate the function, follow the above
instruction, only press 0000 instead in steps 3
and 4.
On page 29 you will find instructions on how
to call the Bewacom.
To Next Page
Loading...
