Safety
2-1
2 Safety
2.1 Intended use
The Compact Flame Controller CFC 200 is intended ex-
clusively for the monitoring of flames. The fields of appli-
cation of this Compact Flame Controller are flame detec-
tions for selective and continuous burner monitoring in in-
dustrial steam generators, single and multi-burner fur-
naces.
Danger when improperly used !
The device may cause hazards if it is not used as in-
tended and/or for any other purposes.
The device has to be used only for the purposes for which
it is intended.
The procedures described in the operating instructions
have to be observed.
The manufacturer/supplier shall not be liable for damage
resulting from use for non-intended purposes. The
user/operating company alone shall bear the risk.
To Next Page
Loading...
Need help?
General
