Safety
2-4
2.4 Safety devices
2.4.1 Fundamental aspects
Check the safety equipment and locking devices on the
device for safe operational condition.
Only operate the device if all safety devices are present
and enabled. The operating company or operator of the
compact flame controller is responsible for the proper op-
eration of the device.
The device has been fitted with warning and danger signs
for the protection of operating staff. These signs have to
be observed. Damaged or illegible signs have to be re-
placed immediately.
2.4.2 Safety devices on the compact flame
controller
The compact flame controller is equipped with the follow-
ing safety devices:
• Housing (protection against accidental contact)
• Ex-proof housing (optional)
• Device earthing (explosion-proof housing)
• Explosion protection barrier (optional)
• Pressure barrier (optional)
• Locking device (optional)
• Purge air connection
• Heating insulator (optional)
To Next Page
Loading...
Need help?
General
