General aspects
1-5
1.6 Obligation of the operating company
The compact flame controller may cause hazards if it is
operated inappropriately or in an improper condition.
The operating company is under the obligation to operate
the machine in proper state only. The operating company
has to secure hazardous areas that exist between BFI de-
vices and the customer's own equipment.
The operating company has to appoint and instruct re-
sponsible staff:
• Only deploy trained or instructed staff.
• Clearly set out the responsibilities of the staff with re-
gard to operation, set-up, maintenance and repair.
• Regularly check that staff are safety conscious and
aware of hazards and are observing the operating in-
structions.
• Before starting work, staff who are assigned to work
with/on the device have to have read and understood
the operating instructions, in particular the chapter on
"Safety", as well as the relevant regulations.
• The operating instructions and relevant regulations
have to be stored in such a way that they are accessi-
ble to operating and maintenance staff.
• Set out who will have responsibility for device opera-
tion and ensure that this person has the authority to
overrule any unsafe instructions of third parties.
Generally valid legal and other binding regulations on ac-
cident prevention and environmental protection have to be
observed and instructed, in addition to the operating in-
structions.
To Next Page
Loading...
Need help?
General
