Safety
2-5
2.5 Safety instructions in case of maintenance
and troubleshooting
2.5.1 Fundamental aspects
• Deadlines set or indicated in the operating instructions
for repetitive checks / inspections shall have to be ob-
served !
• Appropriate workshop equipment is essential for per-
forming maintenance work.
• In conformity with the electrical regulations, work on
the electrical equipment of the system may only be car-
ried out by an electrical specialist or by trained staff un-
der the direction and supervision of an electrical spe-
cialist.
• The adjustment, maintenance and inspection activities
and deadlines stipulated by BFI Automation, including
information on the replacement of parts / assemblies,
have to be observed! These tasks may only be carried
out by authorised specialist staff.
• Operating staff have to be informed before mainte-
nance or other special work is carried out. A supervisor
has to be appointed.
• When working on the plug, the cable must be discon-
nected from the power supply.
• Screw connections which have been loosened during
maintenance and servicing work, have to be tightened.
• If maintenance and repairs require safety devices to be
dismantled, these devices have to be remounted and
checked as soon as the maintenance and repair work
has been completed.
• Operating and auxiliary materials as well as exchanged
parts have to be disposed of in a safe and eco-friendly
way.
• Spare parts supplied by BFI Automation or approved of
by BFI Automation only may be used.
To Next Page
Loading...
Need help?
General
