CITY MANUAL SERVICE
Versie: 5.0 (04-06-2012) 47
7.3 Electronics module
The unit contains one electronics module. Depending on the
version, this includes i.a.:
•The transformer;
• The printed circuit board;
• The connector plate;
• The fuses.
7.3.1 Removing the electronics module
1. Switch OFF the unit using the control panel.
Warning:
w Disconnect the power supply (remove plug
from power point or move isolation switch to
OFF).
2. Remove the inspection panel.
3. Disconnect all unit-connected connectors and
grounded
connections from the printed circuit board.
4. Remove the screws 1.
5. Remove the electronics module.
6. Disconnect the connectors from the connector plate.
7.4 Daikin electronics module (CYQ and CYV)
In addition to the Biddle electronics, the unit also contains a
Daikin electronics module.