Biddle CITY Series - Controlling the Air Curtain

OPERATION CYQ COMFORT AIR CURTAIN
38
See also:
2.6.4 Settings on the Daikin control panel 19
4.2 Controlling the air curtain
4.2.1 Controlling the air curtain strength
The air curtain has two preset strengths.
• Switch over the strength using the key
.
Key
has no function.
Recommended setting
To achieve maximum climate separation with minimum energy
consu
mption, Biddle recommends selection of the lowest set-
ting at which no draught occurs.
4.2.2 Controlling the heating
Display on Daikin control panel (example)
• Set the desired room temperature using the keys .
The system controls the heating of the air curtain automati-
cally. Heating is stopped when the set room temperature is
r
eached. The air curtain then discharges unheated air or stops
(depending on the settings on the Daikin control panel).
Note:
n In order to avoid problems with draughts, Biddle
recommends that the temperature is set to
Maximum.
See also:
2.6.4 Settings on the Daikin control panel 19