7
5 |
6 |
Do not attempt to unfold the bike at this point in time!
Caution
Assembling your Gi Fly
Put the seatpost on the folded bike. Slide the tube of the seatpost halfway into the
seat tube. Once you have inserted the seatpost tube, securely fasten the clasp on
the bike tube (refer to section 6.A.i of the Gi Fly manual for further instruction). Don’t
worry about the height of the seatpost – we are not tting you to your Gi Fly at this
point. We are putting the seatpost onto the bike so that it can stand while in its folded
position (see image D).
D
Stand the bike in its folded position. Now
that you have attached the seatpost and
saddle you can stand the bike up in its fold-
ed position. To do this, balance the bike on
the back of the saddle and on its two wheels
(See image E).
E
To Next Page
Loading...